10 Steam Machine tips for better performance and a better picture

By Gaming On Steam ·

This Steam Machine guide is the set of tips I wish I’d run through when I first set up Valve’s living-room PC: updates and firmware first, then picture quality, storage, and a few extras that make day-to-day use easier. The advice comes from Valve’s own Steam Machine support guide and from what we’ve seen testing the Machine here.

Steam Machine guide: start with updates, and give the box some room

Before you settle in for a long session, update everything. In Settings > System, check Software Updates for SteamOS and Hardware Updates for the Machine’s firmware. Controller, puck and wireless adapter updates live under Settings > Controller. It really matters. SteamOS 3.8.28 and firmware 108 fixed CPU performance that could stay slow after waking from sleep, which we ran into ourselves, and they improved how games use video memory too.

Then give the box room to breathe. Valve says not to put it on carpet or shut it in a closed cabinet, and to leave a few inches on every side. If you’re plugging in a fast drive, use the front USB ports: those are USB 3.2 Gen 1, and the ones on the back are only USB 2.0. I’d also turn on HDMI CEC under Settings > Power so the TV switches on when the Machine wakes from sleep.

Pick the right resolution, then try FSR 4.1

Out of the box, games run at 1080p, which is what Valve tests with for Steam Machine Verified. You can change that for everything in Settings > Display, or per game. Valve says most games play great at 4K 60 with FSR, but some heavy ones don’t. In our Cyberpunk 2077 test, 4K High with FSR 4 on Quality ran at 30 to 40 frames per second; we dropped that to 1440p with the same settings and it was 60 or more.

That’s a good moment to try FSR 4.1. Valve added it to Proton Experimental for games that support the FSR upgrade. In a game’s properties, go to Compatibility, force a specific Steam Play tool, and pick Proton Experimental. It’s still experimental, so if a game acts up, switch it back.

Dial in your TV, and get your controllers sorted

A living-room PC is only as good as the picture on the screen. In Settings > Display > Advanced you’ll find HDR, SDR brightness, native color temperature and RGB range. Then check the TV’s own menu. Valve’s advice is to look at HDMI format, color depth, RGB range and black level, and to turn off any AI picture processing or extra image enhancement. Plenty of games have their own HDR calibration too, so it’s worth a minute in there as well.

Next, get your controller situation straight. The Steam Controller pairs directly to the Machine’s built-in wireless adapter, so you don’t need the puck for that connection, and up to four can connect. If an Xbox controller won’t behave, Valve says many of them need a firmware update from a PC first. And a simple one I use all the time: long-press the Steam, Xbox or PlayStation button, then pick Show Controller Shortcuts.

Add more storage, the easy way first

The easy storage upgrade is a microSD card. Format a new card in Settings > Storage. If you’ve already used a card as library storage on a Steam Deck, it should work on the Machine straight away, games and all. The SSD and DDR5 memory can be upgraded too, and we used iFixit’s guides for our SSD swap. Just know that Valve doesn’t recommend opening the Machine, and any damage isn’t covered by the warranty.

Check Great on Machine, then use Desktop Mode for everything else

Number three is to check Great on Machine. It’s a section in your library that shows games that are Steam Machine Verified or Playable, and the badges show on the game pages too. Verified means the default controls and graphics settings work well out of the box. Valve says if a game runs well on Steam Deck, it’ll run well on the Machine, so you’ve already got a huge list to start with. I’ve also written about games that surprised me on Steam Machine, if you want a few starting points.

Number two is Desktop Mode, which is for everything else. Open the Steam menu, then Power, then Switch to Desktop. From there, our guides use non-Steam launchers to add Epic, GOG, EA, Ubisoft and Battle.net, plus apps like Netflix, straight into your Steam library. EmuDeck sets up emulation too. When you’re done, the Return to Gaming Mode icon on the desktop takes you back. These are community tools, so use them at your own risk.

The plugins I keep on the Machine

My number one tip is to add plugins. Install Decky Loader from decky.xyz in Desktop Mode, then head to the plugins page on our website. It features Steam Machine plugins with guides. Decky MultiFrameGen handles frame generation and upscaling. In our Cyberpunk 2077 test with HelixSR and MAKO frame generation, it hit 120 FPS at 1440p. Steamcord brings Discord into Gaming Mode, and UnifyDeck pulls your other launchers into Steam. They’re unofficial and not made by Valve, so use them at your own risk, and know that a Steam update can break Decky until Decky catches up.

A bonus: Remote Play and the SteamOS 3.10 preview

A bonus tip: stream your Machine to your Steam Deck with Remote Play. Recent Steam updates added HDR streaming to the Deck OLED and a new low-latency codec called Pyrowave. And if you want new features first, go to Settings > System > System Update Channel. The SteamOS 3.10 preview adds HDMI 2.1 VRR for AMD graphics, which Valve said it was working on for the Machine. It’s a preview, so expect a few bugs.

Wrapping up

If you only do a few things from this Steam Machine guide, make them these: update SteamOS and the firmware first, give the box some air and use the front USB ports for fast storage, then spend a minute on resolution, FSR and the TV’s picture settings. After that, a microSD card is the simplest way to add space, and the plugins on our site are the extras I actually keep installed. Remote Play to a Deck is a nice bonus if you want to take a session out of the living room. None of this is complicated, but it makes Valve’s living-room PC feel a lot more finished once it’s done.

More videos

View channel →