Steam Frame news today is Valve’s SteamOS 0.5.10 Beta for Steam Frame, which landed on 19 November. It is on the Beta channel only, the features are still being tested, and you opt in from Settings > System > System Update Channel. The change that jumped out on r/SteamFrame, in a post by u/SunwindPC, is a new per-game control for controller haptics strength. There is more besides that: higher default streaming resolutions, a new Display Sharpness setting, lower eye-tracking latency and a fix for a boot hang on the Steam Frame logo after an OS update.
Steam Frame news: how to get the 0.5.10 beta
This is not a stable-channel release. Valve says SteamOS 0.5.10 has just been released for Steam Frame, and that the update is for the Beta channel, with new features that are still being tested. If you want it, open Settings, go to System, then System Update Channel, and switch to Beta. If you would rather stay on the usual channel until this has had more time on more headsets, you can leave it where it is. I have not run 0.5.10 myself yet, so what follows is from Valve’s own notes, plus that r/SteamFrame thread pointing to the haptics setting.
Per-game controller haptics, at last
The new preference lets you control haptics strength per game. You will find it under VR Settings > Controllers > Manage Controller Bindings. That is the line the r/SteamFrame thread treated as the headline, and it is an official setting, not a community workaround. If one title buzzes much harder than another, this is the place Valve has given you to turn it down or up without changing every game at once.
I would go there first if you already know a game whose rumble sits badly with you, then try a session with the new default streaming picture before you start chasing other image options.
Sharper streaming and a new Display Sharpness control
Valve says it has improved streaming decode performance, which allows for higher default streaming resolutions. It has also added a global Display Sharpness control, which defaults to on. You can tune it to your own taste in VR Settings > Display > Display Sharpness. Because it starts switched on, that is the first place I would look if the image suddenly feels over-sharpened after you update.
Two smaller picture fixes ride with that. Valve says it has reduced the “green tint” on high-frequency greyscale content, and reduced head wobble when you are streaming remote desktops. It has also upgraded the Iris video decoder driver, which sits behind the streaming improvements, and renamed Foveated Sharpening to SGSR Sharpening. If you had the old name memorised in the menus, look for SGSR Sharpening now.
Eye tracking, Multi-Link and a boot hang fix
Eye-tracking latency is improved, particularly at lower framerates. That will matter most when a game is already leaning on the tracking, or when the headset is not running at the top of its range. If you have been checking how well the cameras follow your eyes, this is a software-side change rather than a new calibration tool, but it sits in the same area as Frame-EyeCal, the free eye-tracking check I wrote about earlier this month.
Multi-Link Streaming is more robust under adverse network conditions, which is Valve’s way of saying it should hold up better when the connection is poor. And there is a fix I am glad to see written down plainly: a hang on the Steam Frame logo at boot after you update the OS. If your headset has ever sat on that logo following an update, 0.5.10 is meant to stop that happening.
What this follows, and a note for developers
This is the next SteamOS beta in a run I have already been covering on the site. In early November I wrote about the Room View beta, SteamVR fixes and Frame Cinema in 0.5.8, and then about chroma-key Room View arriving in SteamOS 0.5.9. 0.5.10 does not replace those notes; Valve still lists the earlier Room View work in the recap at the bottom of this announcement. The new material is the haptics control, the streaming and sharpness changes, the tracking and Multi-Link improvements, the boot-logo fix, the Iris driver upgrade and the SGSR rename.
For developers, Valve has added support for XR_KHR_convert_timespec_time in the Android runtime. That is an OpenXR timing extension, and it is the only developer item in this beta.
Wrapping up
If you want the Steam Frame news from this beta in practical terms, it is this. Opt in through Settings > System > System Update Channel if you are happy to run features that are still being tested. The per-game haptics control is under VR Settings > Controllers > Manage Controller Bindings, and Display Sharpness is under VR Settings > Display > Display Sharpness, on by default. The rest is quieter, and useful: higher default streaming resolutions, less green tint on fine greyscale, less remote-desktop wobble, better eye-tracking latency at lower framerates, sturdier Multi-Link on a weak network, and a fix for that post-update logo hang. I will keep an eye on what changes before this leaves the Beta channel.








