After almost four months, I’d still buy a Steam Machine

By Gaming On Steam ·

This Steam Machine review is the honest one after almost four months with Valve’s living-room PC in the house, including the real timeline. I am not going to pretend we have had this box for five months. Valve began sending the first purchase emails and shipping units at the end of June, with the first batch starting on 29 June 2026. As of late November, that is almost five months since launch. We did not have one on day one. I first got my hands on it in late July, with a first look published on 26 July, so in this house it has been almost four months. That is the review you are actually getting.

What I thought of the box on day one

When it showed up, I was pretty honest about what I saw. This thing is small. I had it down in the basement for work, and I could take it upstairs to the living room without thinking about it. It is not much bigger than the Steam Controller sitting next to it. The front plate pops off with magnets if you want to swap it. The power cable is just a normal cord, not a giant PC brick. And the finish is a fingerprint magnet. I tried to clean it for that first look, and you could still see them.

On performance, I went in with low expectations for 4K. I said most games would be happiest at 1080p 60, and that 1080p 60 actually looks good on a big TV. I also almost cancelled my order because of the first wave of reviews. I am glad I did not. I hoped Valve would cook the same way the Steam Deck got better after a rough launch. And Valve has been cooking.

What has actually changed since July

In early August we were dealing with a rare issue where CPU performance could stay poor after the machine woke from sleep. A game would feel sluggish until I restarted. Valve’s Steam Machine firmware 108 fixed that, first arriving on the beta channel around then and going out to everyone with SteamOS 3.8.28 in late September. The same SteamOS update also greatly improved VRAM management, which official notes said would help performance and stability when video memory is tight.

At the end of July, Valve also made FSR 4.1 available in Proton Experimental for games that support the FSR upgrade. In October, SteamOS 3.9 arrived for the Deck and the Machine. And in mid-November, the SteamOS 3.10 preview added support for HDMI 2.1 VRR, FRL and ALLM on AMD graphics. That is still a preview, so expect bugs. I am not going to tell you to live on the preview channel, and I am not going to tell you the HDMI port suddenly became something it is not. Valve’s official store still lists HDMI 2.0 on this box, and the better video output is still DisplayPort 1.4.

The other big change is availability. On 19 November, Valve said you can buy the 512GB model without a waitlist: add to cart, with delivery in a few business days, at least while stock lasts. The 2TB waitlists are closing because there are more people in line than units. Memory and storage costs are still a mess, and Valve says it will have more to share in January. I have already written up that 512GB Steam Machine news in more detail.

How it runs now: 1080p, 1440p and 4K

On day one I was recommending 1080p. Since then we have tested a lot of games. 1080p is still the default, and it is still the resolution Valve uses for Steam Machine Verified testing, but in our tests the sweet spot for a lot of games on a big TV is 1440p.

Cyberpunk 2077 was one of the first games I tried on this machine, even in Dogtown. Then version 2.5 got better. At 1440p High with FSR 4 on Quality, we saw 60-plus frames a second. Native 4K High is more like 30 to 40. Add frame generation and we have hit 120, but 1440p High with no frame generation is how I would play it. Dune: Awakening is the one that really surprised me: full 4K, High preset, 50 to 60 frames a second. Most games struggle at 4K on this box. This one did not. Silent Hill: Townfall hit 4K at 60 with FSR on Ultra Performance. That is a heavy upscale, so it is not native 4K, but it looks surprisingly good in that game. STAR WARS: Galactic Racer held a locked 60 at 1440p, with no frame generation required. Onimusha: Way of the Sword ran Ultra at 1080p and still held 60 at 1440p.

So no, this is not a native 4K 60 machine in every game. Reviewers who put it in PS5 territory were not making that up. But it is more than just 1080p, and the software side with FSR 4.1, that sleep fix and the newer SteamOS builds gives us more room than we had in July. I have already gone into why I would pick a Steam Machine over a PS5 in more depth, and there is a Steam Machine guide for the setup and picture settings behind some of these results.

Living with the ports, the controller and a real PC

The hardware itself has not changed, of course. It is still a tiny cube with a magnetic faceplate, DisplayPort 1.4 and HDMI 2.0 on the back, gigabit Ethernet, and no headphone jack. If you want headphones, it is Bluetooth. If you want the better video port, use DisplayPort. The HDMI cable is already in the box.

The official Steam Controller is still the accessory this machine is built around. There is a 2.4 GHz adapter inside the cube, so you can pair up to four of them without the puck, and a controller on that adapter can wake it from sleep. It is also a real PC. Open the Steam menu, go to Power, then Switch to Desktop, and you get a full Linux desktop, a browser, a file manager, other launchers, and emulators for games you own. And if you have a Steam Deck, it is the same account, the same library, and Steam Cloud saves for supported games. Start something on the TV, pick it up in bed.

A couple of caveats have not gone away. Valve does not recommend opening the machine, and damage from that is not covered under warranty. Even though iFixit has shown the RAM is two DDR5 SODIMM slots and the SSD is a single M.2, I would still treat it as a box you should not open unless you accept that risk. Keep it off carpet, out of a closed cabinet, with a few inches on every side. It intakes from the bottom and exhausts out the back.

Steam Machine review: would I still buy it?

Back in July I said I was glad I kept my order. The price is still high. The base model still starts at $1,049 on Valve’s US store, and it still does not include a controller. I checked those figures today; the official UK starting price is £879. A PS5 is cheaper. A PS5 Pro is more powerful, and some games with anti-cheat still do not run on SteamOS. PlayStation exclusives still come to PC late, if they come at all. But if your Steam library is the point, and you want those games on the TV, I think this is still the most interesting living-room box you can buy. Based on what we have tested and what Valve has shipped since July, I would make the same call again.

It is not five months in our house. It is almost four, and almost five since Valve started shipping. Prices and stock are what we saw in mid-November 2026, and they can change. The 512GB model was add to cart when we checked on the 19th. The 2TB model was a different story. For me, this Steam Machine review ends in the same place my first look did: I would still buy it.

More videos

View channel →