This Steam Deck monitor review is my time with the Uperfect GR14BU, a 14-inch 3K OLED I’ve been using on both the Steam Machine and the Steam Deck. It’s a gorgeous, slim panel that I’d call a bargain, with one clear weak point: the speakers.
Steam Deck monitor review: the specs, and what’s in the box
The GR14BU sits in Uperfect’s Blaze Gaming range. It’s a 14-inch 16:10 OLED at 2880×1800, with a 120Hz refresh rate, a 1ms response time and 10-point touch, all in an aluminum body just 7mm thick and 590g. Uperfect’s official figures also put brightness at 500 nits and the color gamut at 109.9% DCI-P3. There’s no built-in battery, which matters once you start plugging it in.
Uperfect lists the monitor at $399.99 on its official product page, though that price can change. In the box you get two USB-C to USB-C cables, a mini HDMI to HDMI cable, a USB-A to USB-C cable and a PD power adapter. There’s a VESA mount on the back, which Uperfect specifies as 75x75mm, and some right-angle connectors as well, which make the cabling a little easier.
On the Steam Machine, it needs its own power
I’m testing it on both devices because the setup is quite different. On the Steam Machine, the monitor sits really nicely on top, so you can keep the whole arrangement compact. You will need extra power, though, because the Machine doesn’t provide enough over HDMI or USB-C to run the display.
On the right-hand side of the monitor there are two full-featured USB-C ports and a mini HDMI. Mini HDMI goes into the monitor, HDMI into the back of the Steam Machine, then one USB-C cable for power. It doesn’t matter which USB-C port you use, and it kicks in straight away. Wake the Machine with the controller and you can immediately see how good this screen looks. That OLED really pops.
Picture, HDR and a 1600p 120Hz desktop
SteamOS gives you HDR and VRR toggles here, which we’ve also looked at in the SteamOS 3.10 preview and in my Steam Machine picture settings tips. Uperfect doesn’t list HDR or FreeSync in the official specs, though, and VRR caused me problems, so I’d leave it off. Honestly, on this OLED I found the picture looks a little better with HDR off anyway.
It supports the full 16:10 aspect ratio. I’m running it at 2560×1600 at 120Hz, which the Steam Machine handles fantastically well, and the monitor’s own menu confirms the panel maxes out at 2880×1800. Uperfect’s official page says the HDMI port supports a maximum of 100Hz, with 120Hz reserved for the USB-C ports. That’s the official figure; on the Machine I was still running 2560×1600 at 120Hz over HDMI.
A quick tour of the menu: brightness is at 100%, black levels are at default, and you get color temperature settings too. One tip: the top button is power, so be careful not to hit it thinking it’s the menu button. And while this is a touchscreen, touch doesn’t work over HDMI, so on the Steam Machine it’s display only.
The speakers are the weak point
The GR14BU has a pair of 1W speakers built in, and as with most portable displays I’d recommend headphones. The volume is already pretty much at max, so I set up a quick race with the mic right in front of the speakers to put them to the test. I was seeing 100-plus frames per second at 1600p and was very happy with how the Machine was running it, as long as I didn’t crash. The sound itself is pretty decent, but it’s not as loud as I’d hoped. The monitor’s volume is maxed out, so you can push the in-game volume a little, but overall the speakers are the weak point. The display, though, is absolutely gorgeous, and if you want a compact Steam Machine setup with this on top, it’ll follow you absolutely anywhere.
My one frustration is that Valve didn’t give the Steam Machine USB-C display output, so we’re limited to HDMI or DisplayPort, and that rules out extras like the touchscreen.
On the Steam Deck, one cable and the touchscreen actually works
That’s why the Steam Deck is so interesting, because the setup is completely different. One full-featured USB-C cable goes from the Deck to the monitor, then power comes back into the monitor from either a power bank or the included PD power adapter. I’d recommend a 45W or greater supply if you’re running it this way.
Now you get the full Steam Deck experience, which means the touchscreen actually works on that OLED display. The volume is still on the low side, though. One big benefit over just using the Deck’s own screen in a docked setup is that you can keep the power out of the way, sit further back with a controller and enjoy a much bigger picture. If you’ve only got a Steam Deck LCD, this is also a way to get that OLED experience and still use the same panel with other devices.
Here I’m running Hogwarts Legacy with HelixSR for upscaling. If you’ve ever played it, you’ll know how hard it can be to run. I’m getting 50 to 60 frames per second with frame generation. To be fair, it’s not running at the full 1600p, but it gives a much better image overall.
A compact OLED that earns its keep
Overall, the Uperfect GR14BU is an absolute bargain: a gorgeous 14-inch 3K OLED at 120Hz, touch on the Steam Deck, and a slim body that’s easy to carry. The speakers are the weak point, so bring headphones. It’ll certainly come in handy when I’m relegated from the TV.







